FRITSCH PULVERISETTE 25/19 - Manual (Page 9)

Cutting mill combination „pulveristte19“ – „pulverisette 25“ page 6
5 Cleaning
We recommend using a vacuum cleaner equipped with different nozzles
for cleaning the machine, a small nozzle especially for cleaning areas
that are difficult to access, and brushes of various sizes. This way, dirt
can be brushed into the vacuum cleaner nozzle. Inaccessible areas can
also be blown clean with compressed air.
When working with moist mill feed or, if very fine mill feed is inside the
machine, use a damp cloth to wipe the surface clean.
Refer to Chapter 5 of the Operating Manual of p-19 and p-25 for instruc-
tions on cleaning the different components.
5.1 Cleaning the sample splitter
To empty the sample splitter, a large, rectangular container is placed in
front of the p-19 and the closures on the side of the sample splitter hous-
ing are opened. The bottom of the sample splitter housing is now turned
downwards and the metal hood is taken off. The mill feed can now be
brushed into the container.