FRITSCH PULVERISETTE 1, Model I classic line - Manual (Page 24)

Page 22
6 Accessories
6.1 Dust extraction
• 43.9050.00 Dust extraction device
• 43.9051.00 Polyester filter set (2-pack)
• 43.9052.00 Plastic bag (5-pack)
Der Labor-Backenbrecher wird ohne Absaugöffnung ausgeliefert. Um eine
Staubabsaugvorrichtung benutzen zu können, muss die rear cover (26) durch eine
spezielle cover dust extraction (27) ersetzt werden.
On delivery, this is found with the required Allen key (a) in the
collecting vessel (12)
of the instrument.
6.1.1 Converting for dust extraction
1. Loosen the lower hex socket screws (b) of the rear cover (26) with the
provided Allen key a). Only unscrew these two screws one turn. The two
upper screws must be unscrewed entirely.
WARNING
Voltage!
The power plug must be pulled before starting the
installation work.
The installation work may only be performed by
authorised persons.
(26) Rear cover
(27) Cover dust extraction
(a) Allen key
b