FRITSCH PULVERISETTE 1, Model I classic line - Manual (Page 34)

Page 32
10 Disclaimer
Before using this product, these operating instructions are to be carefully read and
be understood. Use of the product requires expertise and it is to be carried out only
by commercial users. The product may be used exclusively for the applications
outlined in these instructions and within the scope of the regulations set out in these
operating instructions, and it shall subject to regular maintenance. In the event of
infringements of these instructions and/or improper use or maintenance, the
customer assumes full liability for the functionality of the product and for such
damage or injury as may occur as a result of breaching these obligations.
The content of these operating instructions is subject as a whole to copyright
protection. This operating manual and its content may not, in any form, in whole or
in part, be reproduced, further distributed or saved without the prior written consent
of Fritsch GmbH
These operating instructions have been compiled to the best of our knowledge and
belief and checked for relevance at the time of printing. FRITSCH GMBH does not
accept any warranty or guarantee for the accuracy or completeness of the content
in these operating instructions, including, but not limited to, the tacit warranties of
merchantability and suitability for a particular purpose, unless applicable laws or
adjudications prescribe a liability.
FRITSCH GMBH expressly reserves the right to amend and/or to update these
operating instructions without prior notice. The same applies to changes and
improvements to the products described in these operating instructions. The onus
for obtaining information about the current status of these operating instructions lies
with the individual user. In this regard, please contact the FRITSCH GMBH
distributor in your area or apply directly to Fritsch GmbH, Industriestrasse 8 D-
55473 Idar-Oberstein, Germany.
Not all parts illustrated must be built into the product. A right to delivery of these
parts does not exist. If interested in them, please contact the FRITSCH GMBH
distributor in your locality or Fritsch GmbH, Industriestrasse 8, D-55743 Idar-
Oberstein directly.
FRITSCH GMBH endeavours, with the greatest of care, to continually improve the
quality, reliability and safety of their products and to conform with the state of the
art. The products supplied, as well as these operating instructions, correspond with,
at the time of transfer from the influence area of FRITSCH GMBH, the respective
state of the art.
Customers agree and acknowledge that, through usage of the product, defects,
faults or errors cannot be ruled out entirely. To avoid the risks thereof, of damage to
persons or property being incurred, or of any other direct or indirect damages,
customers must provide for adequate and comprehensive safety measures whilst
working with the product.
Fritsch GmbH expressly disclaims every explicit or implied, contractual or arising
from improper handling or a fixed contractual, statutorial or other liability, warranty
or other obligation in respect of compensation obligations. Under no circumstances
shall Fritsch GmbH accept liability, resp., are you entitled to compensation, for any
special, direct, indirect, incidental, or consequential damages, including but not
limited to lost profits, lost savings, lost revenues or economic losses of any kind, or
for compensation obligations towards third parties for downtime, goodwill, damage
to or replacement of equipment and property, for the costs or restoration of
materials or goods in connection with the product or the utilisation of our products,