Holtgreven GSE-355 I.S. - Manual (Page 49)

40
C
HAPTER
4: C
ONFIGURATION
Entering the Setup Mode (Model 350)
To prevent accidental changes to the Indicator Setup, a sequence of keystrokes is used to gain access to the Setup
Mode:
 + 
 ,  ,  , 2 , 1
These keystrokes must be made within five seconds, or the indicator will return to the Weigh Mode.
To access the Setup Mode:
1. From the Weigh Mode, press  + 
DISPLAY READS X Setup ~ Enter Code
2. Press 
DISPLAY READS X S
3. Press 
DISPLAY READS X SZ
4. Press 
DISPLAY READS X SZP
5. Press 2
DISPLAY READS X SZPU
6. Press 1
DISPLAY READS X Chgs ~ Poss!
P110.— — ~ F.S.= ~ 100
To access Setup in a view-only mode:
1. From the Weigh Mode, press  + 
DISPLAY READS X Setup ~ Enter Code
2. Press 1
DISPLAY READS X No ~ Chgs
P110.— — ~ F.S.= ~ 100