Industrial Data Systems IDS DT200 - Manual (Page 37)

DT 200 Users Manual version 1.E Diagnostic Tests
33
Page List
FORMAT DESCRIPTION
PAGE 1
Prints when the DT200 is in the GROSS weight mode.
PAGE 2 Prints when the DT200 is in the NET weight mode.
PAGE 3 Used by Scale Basic functions when needed.
PAGE 4 Used by Scale Basic functions when needed.
Print Item List
Item # Description
2-4 Print Label 1, 2, and 3 (see chap. 5: Set I/O Port, parameters 32-34)
84-90 Print Labels 4 thru 10. (Parameters 84-90)
5
Gross Weight (primary units)
6 Tare Weight (primary units)
7 Net Weight (primary units)
8 Gross Weight labeled “WEIGHT” (primary units)
9 Scale Status (used by continuous transmit)
10 Time and Date (battery/time & date option required)
11 Time (battery/time & date option required)
12 Date (battery/time & date option required)
15 Gross Weight (alternate units)
16 Tare Weight (alternate units)
17 Net Weight (alternate units)
18 The Displayed weight (in the displayed units and mode)
21 Print Code 1 (see section: Set I/O Port Parameters, params 35-38)
22 Print Code 2
23 Print Code 3
24 Print Code 4
25 Gross Weight (display units)
26 Tare Weight (display units)
27 Net Weight (display units)
32 Space holder, does nothing.
33 Form Feed (ASCII 12)
34 Carriage Return (ASCII 13)
35 Line Feed (ASCII 10)
40 ID number
41 ID total (ID register 1)
42-46 ID registers 2 through 6
51-66 Memory registers 1 through 16
84-90 Print Labels 84 to 90 (see parameters 84 to 90)