Jaclo Thermostatic Valve, Rough - J-TH34 - Manual (Page 5)

jaclo industries | 129 Dermody Street Cranford, NJ 07016
p 908.653.4433 | 800.852.3906 f 908.653.1717 | 800.852.4133 JACLO.COM | PG 5
CREATED 5.2014
| PG 5
(1) ROUGH VALVE INSTALLATION (J-TH34-686/J-TH34-688)
1. Position valve assembly so outer edge of finished wall is between min./max. thicknesses marked on rough in
shield. See Fig. 1
2. Using appropriate fasteners, mount valve assembly to studs/blocking using mounting holes. See Fig. 1
Diverter and Thermostatic valve are factory sealed, do not separate!
VALVE ROUGH-IN SHIELD
C
Extra Outlet requires volume
control or plug (not supplied)
INSTALLATION EXAMPLE
A
Hot
Inlet
Cold
Inlet
B
2x
Mounting
holes
Figure 1
TO SHOWERHEAD OR
OTHER PLUMBING
ASSEMBLY
THERM./DIVERTER
OPTIONAL VOLUME
CONTROL
1" THICK FINISHED
WALL OUTER EDGE
2" Ø Max
4½" Ø
Max
4½" DIA. MAX
HOLE IN WALL
SAMPLE HOLE IN WALL
3 5 / 16 "
TO TUB SPOUT ONLY