Canon EOS Rebel XTI - Manual (Page 135)

135
wPrinting with PictBridge
With step 4, select the item. When
is displayed as shown on the
left, press the <C> button. You
can then set the parameters for fine
adjustments.
The parameters that can be adjusted
for the selected item are shown in the
table below.
Select the item, then press <0>.
(k: Adjustable)
Press the <U> key to make the
adjustment, then press <0>.
Adjustment of Printing Effects
Item
Off / On / Vivid /
Natural
Natural M
B/W / Cool tone
/ Warm tone
Brightness k k k
Adjust levels – k k
k (face) Brightener
k k k
Red-eye correction k k k
Detail
set.
Contrast
–
k k
Saturation k
– Color tone k
Color balance k
After making fine adjustments for the printing effect, if you do step 4 again to
change the printing effect’s setting, the adjustments will all revert to the
default.
When [Default] is selected, the printing adjustments can not be adjusted.
[Brightness]