KEYENCE GL-RHG Series - Manual (Page 66)

3-7 Mounting Brackets
3-18 GL-RHG-M-NO3-E
In
sta
llatio
n
to
a Mac
h
in
e
3
Straight mounting bracket (GL-RB11) / L-shaped mounting bracket (GL-RB12)
Point If the length for a single GL-RHG unit is 1280 mm or greater, use the following antivibration
bracket additionally as an intermediate support bracket.
•
If you use Straight mounting bracket, use Antivibration bracket for the straight mounting
bracket.
• If you use L-shaped mounting bracket, use L-shaped mounting bracket as an antivibration
bracket.
For more information about the mounting position, see "Dimensions" (page 7-10)
1
Insert the mounting bracket into the GL-RHG along the groove on the back side, as shown in the
following image.
Straight mounting bracket
L-shaped mounting bracket
2
Secure the mounting bracket to the GL-RHG with hexagon socket bolt on the back side.
Straight mounting bracket
>20mm
Match lines of both straight mounting
bracket and GL-RHG unit.
Position of straight mounting bracket is
adjustable within range of 20 mm.
L-shaped mounting
bracket
Hexagon socket bolt (M5, Length: 8 mm, width across flat: 3 mm)
A recommended tightening torque of 3 N•m