Kimber Ultra Carry - Manual (Page 31)

31
3. Push inward on the end of the slide stop shaft
on the right side of the pistol and remove the
slide stop from the left side.
4. Remove the slide by sliding it forward off the
frame.
5. Tip the barrel link forward to clear the recoil spring
tunnel. Then pull the barrel clear of the slide.
The pistol is now disassembled for cleaning
purposes (field stripped).
Do not drop the hammer while slide is removed
from the pistol.
BARREL LINK FORWARD
RECOIL
SPRING GUIDE
RECOIL SPRING
SLIDE