Kistler-Morse KM SVS2000 - Manual (Page 52)

48
97-1129-01 Rev. D
www.kistlermorse.com
10. When the display shows the desired selection, press the Enter Key. The display acknowledges the
selection and returns to:
reLAy1 HI/LO
11. Press the up Arrow key to proceed to the next menu. The display shows:
reLAy1 TrACk
12. Press the enter key to access the relay1 Track menu. The display looks like this:
rLy1 TrACk:*grS
(Asterisk indicates the current selection.)
If the displayed menu does not have the desired selection, press the Up Arrow Key to display the next
page of the menu. Continue to press an Arrow Key until you see the desired selection (there are four
pages to the Rly1 Track Menu).
13. When the display shows the desired selection, press the Enter Key. The display acknowledges the
selection and returns to:
reLAy1 TrACk
14. Press the up Arrow key to proceed to the next menu. The display shows:
reLAy1 FAIL-SAFe
15. Press the enter key to access the relay1 Fail-Safe menu. The display looks like this:
FAIL-SAFe: *OFF
(Asterisk indicates the current selection.)
If the displayed menu does not have the desired selection, press the Up Arrow Key to display the next
page of the menu. Continue to press an Arrow Key until you see the desired selection (there are three
pages to the Fail-Safe Menu).
16. When the display shows the desired fail-safe, press the Enter Key. The display acknowledges the
selection and returns to:
reLAy1 FAIL-SAFe
17. Press the up Arrow key to proceed to the next menu. The display shows:
reLAy1 PreACT
18. Press the enter key to access the relay1 Preact menu. The display looks like this:
> 0 lbs
(Units are consistent with Disp Units.)
19. Use the numeric or Arrow Keys to input the preact. Press the Enter Key to save the value in memory.
The display acknowledges the entry and returns to:
reLAy1 PreACT
20. Press an Arrow Key to scroll to another menu for this setpoint or press the Gross or net Key to return to
Run Mode.