Kistler-Morse KM LD3xi Load Cell - Manual (Page 8)

Chapter 1. Description
1-2
Installation Option Descriptions
Universal Top Adapter Plate
This option consists of the Universal Top Adapter Plate, spring washer and a
hex head bolt. The adapter plate attaches to the load disc with the bolt and
washer. The adapter plate then bolts to a vessel gusset or a flat plate welded
to the vessel leg, using customer-supplied hardware.
This section will briefly describe the following hardware options:
Universal Top Plate Adapter, Leveling Top Plate Adapter,
Anyadapter Plate and Leveling Base Adapter Plate.
As well as the LD3xiC Load Cell configuration.
See Chapter 2 and 3 for more specific installation instructions and
refer to the TI drawings located in Appendix D.
Note: Accomodates up to three
degrees of tilt in the floor or
vessel legs.