Kofax Communication Server 9.2.0 User Manual
© Copyright Kofax, Inc. All information is subject to change without notice.
– Portuguese (Brazilian)
Note: If you change the language settings you have to exit TCDialer (at the system tray) and restart is to
get another language (only closing is not enough).
8.2.2 History Length
This configuration parameter limits the length of the history list. The default history list length is 10.
8.2.3 Hide Preferences
This configuration parameter specifies if the Preferences button on the TCDialer dialog box is visible or
Note: If the Preferences button is invisible you can make the Preferences button visible either with the TC
Management Console or with the registry editor: (set
HKLM\SOFTWARE\TOPCALL\TCDialer\HidePreferences to 0)
8.2.4 Hide History
This configuration parameter specifies if the History button on the TCDialer dialog box is visible or not.
This configuration parameter specifies if telephone numbers are converted into a standardized format.
All characters that are not digits are removed.
If a + character is found at the first position it is converted to the character(s) that is(are) specified with
Normalize’+’ parameter. The first 0 after the + character will also be removed. E.g. +43 (01) 86353
is converted to 0043186353
Note: If the conversion is disabled (Normalize = 0) then the conversion of the + character is also
If normalizing is enabled, a plus character at the first position is replaced by this (these) character(s).
If Prefix is not empty and the length of the destination number is greater than the value of the Internal
Numbers Length, the Prefix is added to the destination number, before the number is dialed.
Internal Numbers Length...= 3
dialed destination number...= 123...the number 123 is called (internal number)
dialed destination number...= 1503...the number 01503 is called (external number)