Kofax Transformation Modules 3.5 - Manual (Page 15)

Kofax Transformation Modules Installation Guide 7
Installation
This installation guide describes how to install Kofax Transformation Modules and
perform maintenance on an existing installation. It also includes important installa-
tion notes. For installation purposes, it is assumed that you are familiar with Win-
dows standards and user interfaces.
Important Installation Notes
This section lists important notes for installing Kofax Transformation Modules.
Administrator Rights
To install Kofax Transformation Modules, the logged-in user must be part of the Ad-
ministrator group on the local machine.
Install Kofax Capture First
The Kofax Transformation Modules installation installs and registers custom Kofax
Capture components only if a certified version of Kofax Capture (formerly Ascent
Capture) is detected on the computer. Therefore, to use the custom Kofax Capture
components, you must install a certified version of Kofax Capture before you install
Kofax Transformation Modules.
Close Applications
Before installing Kofax Transformation Modules 3.5, you must close Kofax Capture
Administration modules on every workstation. If you upgrade from an older Kofax
Transformation Modules version (formerly Ascent Xtrata Pro) and already use the
release script, make sure that Kofax Capture Release Module is closed as otherwise
the installation cannot update the module correctly.
Installing Kofax Transformation Modules
Installing Kofax Transformation Modules involves the following basic steps, which
you should perform in the order listed.
Step 1: Install Kofax Capture.