Panasonic EW-BU04W - Manual (Page 14)

I storing Measurement Values
Press the Memory/Recall button while the M mark is
blinking to store the measurement.
1
• Up to 90 measurement values can be stored. If you store
an additional value when the memory is full, the oldest
value is deleted and the new value is stored.
DIA._______ Pulse no
C OFF/ON /TT\
ttw J
^mmHi Arm.
IJ
u u
C
DC
C OFF/ON ^ /TT\
Tiw J
• After the memory number has been displayed for
2 seconds, the stored value will be displayed.
f OFF/ON ^ Press the Off/On Start button to switch off the power.
' — — ' • The power will switch off automatically after approximately 5
minutes.