Panasonic NI-W950A - Manual (Page 13)

♦ Clothes are marked Empty the iron and fill it with clean water. There may be contaminants
in the iron/cup.
♦ Burnt cloth Wait until the indicator light turns on after turning the Temperature Selector
from a high temperature to a lower temperature.
Set the Temperature Selector to appropriate position, or use a press cloth
if necessary.
FABRIC IRONING CHART
NOTES;
1. Check fabric for specific ironing instructions, always follow manufacture’s instructions.
2. Iron blended fabrics at setting for lower-temperature fiber or for the highest-percentage fiber.
3. Use caution, some synthetics may melt at high temperature.
Temperature
Selector Setting
Fabric Ironing Recommendations
Acrylic
ACRYLIC
*ACRILAN
*CRESLAN
• ORLON
ACETATE
METALLICS
SUEDE
Dry iron on reverse side, or use a press cloth on top of
fabric.
Don’t sprinkle water directly on fabric to avoid spots.
To iron suede, cover with brown paper and use It as a
press cloth.
Silk
NYLON
* ANTORON
* CAPROLAN
SILK
Dry iron on reverse side.
Wool
WOOL
VELVET
Steam ironing is suggested. Never iron until completely
dry, but leave it with a little moisture.To iron velvet, use
steam but do not let the iron touch the fabric. Hold it
slightly above the surface.
Cotton COTTON
Steam ironing is suggested, Sprinkle water on the fabric,
depending on its thickness. Iron dark fabrics on reverse
side to avoid unwanted sheen.
Linen LINEN
Steam ironing is suggested. Iron dark fabrics on reverse
side to avoid unwanted sheen.
* Trademarks of Fiber Manufacturers.
SPECIFICATIONS
Model No. NI-W950A
Power Source 120 V-- 60 Hz
Power Consumption 14.2 A. 1700W
Mass (approx.) 3.3 lb (1.5 kg)
Dimension (approx.) 12 in. X5.47 in. X5.94 in. (307 mm X139 mm X151 mm)
13