Panasonic NI-W950A - Manual (Page 8)

® CÒ[\/yPONEi\n% IDEMTÌFÌCA’nOiM
© Steam/Dry Selector
@ Spray Mist Button
@ Jet of Steam Button(Vertical Steam Button)
@ Water Fili Cover
® Spray Nozzle
@ Soleplate '
@ Maximum Water Leve! Indication
® Water Tank(Water Window)
@ Self-Cleaning Button
® Handie
@ Thermostat Operating Indicator Light
(Temperature Select Indicator)
® Temperature Selector
® Heel Rest
® AC Cord
©Plug
©Water Cup (MAXIOoz.)
READ THIS INSTRUCTION BOOK THOROUGHLY BEFORE USING YOUR Panasonic
IRON TO BECOME FAMILIAR WITH THE IRON FEATURES
HELPFUL 5RON3WG TIPS
The Temperature Selector has words, dots and steam symbols. For more detailed information,
refer to page 13 of this instruction book.
a) The dots are symbols for 3 temperature ranges:
• Low Temperature
• • Medium Temperature
••• High Temperature
Some fabrics are labeled with these dots as a guide for selecting the proper ironing
temperature setting.
Note: The Thermostat Operating Indicator Light goes on and off alternately to indicate the
changing temperature of Soleplate. If you turn the Temperature Selector from a high
temperature to a lower temperature, wait until the indicator light turns on before using
the iron.
b) The steam symbols are used for selecting steam settings. For further details, refer to page
8-12
#>
As a guide to the Fabric Care Symbols, the following symbols are printed for your information.
Fabric Care Symbols
y A
O
Washing Bleaching Ironing Dry Cleaning
A symbol crossed out indicates that the article of clothing must not be subjected to the
particular treatment. EXAMPLE: (DO NOT BLEACH) ^
Before ironing, sort the garments according to the different heat settings required. Iron fabrics that
require a lower temperature first. Do not touch plastic buttons with a hot iron because they may
melt. Be careful around zippers and similar items to prevent the Soleplate from being scratched.
©I HOW TO FILL WATER
1. Set the Steam/Dry Selector to the Dry position to avoid water leakage.
Open the Water Fill Cover, hold the iron as shown and fill the iron with water up to “ MAX ’
dot (about 10 zo.). Use a water cup for filling (see Note).
2. Check for the correct water fill level with the iron in the vertical position.
3. Close the Water Fill Cover, or water will splash from the Water Tank when ironing.