Panasonic NE-1054F - Manual (Page 15)

other Features
A. To Activate Program Lock:
This procedure “Locks” the control panel Memory Pads Into their programmed heating
times and power levels. DO NOT OPEN THE DOOR. The Display Window must be
blank before the Program Lock feature can be activated.
1.
PROG.
•Press and hold in the PROG. Pad
until the display shows
'P' and “L". (for 6 seconds)
•Program Lock feature is now
activated.
Display Window
P L
NOTE: *Do not press PROG. Pad for longer than 30 seconds continuously, or false failure code may result.
•In “Program Lock”
a. The oven Is started by pressing the desired Memory pad. There is no need to press the START pad.
b. The interrupt feature is deactivated—opening the door cancels the remaining time on the program.
c. The oven cannot be programmed until the program lock feature is deactivated.
m
0
01
B. To Release Program Lock:
This procedure deactivates “Program Lock" and activates all other features.
Oven reverts to a 2 touch operating mode (Memory Pad plus
START Pad).
DO NOT OPEN THE DOOR. The Display Window must be blank before the Release
Program Lock feature can be activated.
Display Window
1.
/
(
---------------------------
STOP/RESET -h
PROG.
V
____________
^
k_________
•Press the STOP/RESET Pad.
While pressing this pad, press the
PROG. Pad until the Display
Window shows "P” (for 6 seconds).
•Program Lock Feature is deactivated,
oven is now in “Program Unlock” mode.
NOTE: »Do not press PROG. Pad for longer than 30 seconds continuously, or a false failure code may result.
•In "Program Unlock"
a. Repeat and interrupt features are operational.
b. Memory Pads can be programmed.
c. Tone loudness control is operational.
-
1 5
-