To set the power level, To set the cooking time, Display – Panasonic NE-1054F User Manual

Page 9: O] ■* 013, Ih 85, Before operating, E[ - a

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before Operating

Make sure the oven is connected to a properly grounded electrical outlet.
vVnen the door is closed, the Display Window is still blank. When the door is opened, the Display Window shows "0”,
=or the detail operation, see the page on each feature.

This oven is preset at the factory for the following:

■ Memory Pads are preset to High Power for the indicated heating times for single stage heating.

1- 10 sec.

2- 20 sec.
3- 30 sec.
4- 45 sec.
5 - 1 min.

6 - 1 min. 30 sec.
7-

2 min.

8-

2 min. 30 sec.

9-

3 min.

0-3 min. 30 sec.

The

Double Quantity (x 2)

Pad is preset to automatically double the programmed time of each Memory Pad.

Example: press

DOUBLE

QUANTITY

(X2)

2 mins.

2 Program Unlock.

3 Cycle counter set to “0" on all pads.

To set the power level:

Select power level before programming the cooking time.

m

_^

о

cn

■u

Press

To set the cooking time:

You can set up to 99 minutes 99 seconds.

Example 1: To set 15 minutes 45 seconds

Press

O] ■* 013

Example 2; To set 85 minutes 30 seconds

P

2:30

P

Press

;60

1 time................... HIGH

2 times................. MEDIUM HIGH
3 times............... . MEDIUM

4 times..................LOW

5 times..................DEFROST
6 times..................HOLD

E[

E[

- a

:60

:30

• a

3:30

Display Window

75

4 5

85 30

When you press the

START

Pad, the Display Window shows

1 hour 25 minutes instead of 85 minutes 30 seconds. When selected

cooking time is over an hour, the Display Window shows hours and minutes,

but the oven works for your setting time.

IH 85

Display:

The Display Window will go blank (when the door is closed):

• at more than 1 minute interruption.
• at more than 1 minute after completion of heating and

removing food.

The display will flash “0”:

• continuously if food is not removed.

Oven Light:

Oven light will be turned on, when:

• you open the door.
• heating starts.

Oven light will be turned off, when:

• you close the door (no heating).
• heating finishes.

-

9

-

Advertising