A&D Weighing MPA-1200 - Manual (Page 26)

24
[ 2 ] Press the Up or Down key to select “SYS”.
[ 3 ] Press the Enter key to enter the system
setting mode.
[ 4 ] By pressing the Up or Down key, change the
setting of each item, and press the Enter
key to confirm it.
2) Item of the system setting mode
Display of the each item and setting contents
Functions Displays Setting contents
Aspirating
speed
High speed Low speed
Dispensing
speed
High speed Low speed
On
Buzzer
Off
On
Blowout
Off
Off
Reverse
operation *3
On
Program
memory
Nine programs between 01 and 09
are available for the “ “.
(Read out your preferred program
from the programs previously set.)
*3 The reverse operation is only selectable when blowout setting is off. It cannot be
selected when the pipette is in MIX mode, either.