AAF International DynaPure - Manual (Page 2)

2
5.2 Prefilter
The optional prefilter is shipped separately to avoid shipping damage.
Install as follows:
1. Unlatch and remove the cover of the DynaPure.
2. Install the prefilter housing on the front of the DynaPure where the
cover has been and latch in place. Locate notch in interior
baffle at bottom center to allow for drainage path.*
3. Reinstall the cover (to the prefilter housing) and latch in place.
1
Cover
(Ref.)
Optional
Prefilter
DynaPure
Filter (Ref.)
Figure 2. Prefilter Installation
Section A-A
3
2 *
2
Notch
A
A