AERCO KC1000 Heater w/Mod-Box Controller - Manual (Page 5)

FOREWORD
iii
Foreword
The AERCO KC Hot Water Heating System is a true industry advance that meets the needs of
today’s energy and environmental concerns. Designed for use in any potable water heating
system, it provides constant temperature water regardless of flow rate. It’s small space
requirements and venting capabilities allows installations without normal restrictions yet with
maximum flexibility. The KC Heater’s load tracking controls modulate over a 14:1 turndown ratio
to match the system demand and yield thermal efficiencies in excess of 93%.
Because of its compact design with direct or chimney venting, the KC Water Heating System is
applicable to any installation with excellent results. Efficiency, reliability and longevity make the
KC Water Heating System a true step forward in Water Heating System design.
After prolonged shutdown, it is recommended that the startup procedures in Section 4 and test
procedures in Section 5 of this manual be performed, to verify system operating parameters. If
there is an emergency, turn off the electrical power supply to the AERCO Heater or close the
Manual Gas Valve located before the AERCO heater. The Installer is to identify the emergency
shut-off device. FOR SERVICE OR PARTS, contact your local Sales Representative listed below
or AERCO INTERNATIONAL.
NAME:
ORGANIZATION:
ADDRESS:
TELEPHONE:
INSTALLATION DATE: _____________________________________________