Statistics 9 – ALTANA Micro-TRI-Gloss μ User Manual
Page 22
Advertising
21
English
Statistics
9
Number of measurements
You can adjust the number of
measurements per sample or per
block with this option, from 2 - 99.
You can find this value in the
measurement display by looking
for “n=” after the forward slash.
The number of measurements
(which increases by one each time
a measurement is performed)
appears before the slash.
Note:
When STATISTICS is activated, all
film thickness values are stored in
the Memory independently of the
sonde used.
In the case of an incorrect
substrate or a high film thickness,
„Infi“ is written to the memory.
When the instrument is switched
off, the last setting remains active.
Advertising