ALTANA Cloud-Runner Manual - Manual (Page 21)

20
5.2 Display of measurement results
The measurement results displayed will vary
depending on the options selected in the
Configuration (see chapter 9, 10). Displayed results
may be broken down into the following elements:
A: Name of the measured sample or checkzone.
B: The number of performed and predefined
measurements (e.g. 2 of 3). The statistic function is
activate if the predefined number of measurements
is greater than 1.
C: The black rectangle shows the active page of the
display. You can access the second page by turning
the scroll wheel. If only one page is active, only one
rectangle is shown.
The measurement values appear in the lower part of
the display area.
Pressing the operate button now, the values will
disappear and the number of readings is increased
by one. Or, if a sample is finished, the name of the
next checkzone/sample will be displayed.
To exit the measurements, press the scroll wheel. A
menu for deleting, interrupt or ending the series
appears. Use the scroll wheel to move the cursor to
“End Test Series” and press operate. The display
switches to the Measure menu after a request for
confirmation.
Getting started
A B
C