ALTANA Wave-Scan II - Manual (Page 47)

46
English
Date / Time
The unit contains an integrated clock.
This makes the date and time of the
measurement available for data
transfer to a PC. The date and time are
not lost even when the battery is
changed. If necessary, adjust the data
by using the scroll wheel.
Display Time
To save energy, the unit automatically
turns off after a certain amount of time.
You can determine what this time is by
specifying a switch off time between
15 and 99 seconds.
13 Setup
Info
This menu displays the following
information about the device:
• Catalog no
• Serial no
• Firmware version
• Free memory capacity
• Battery capacity
• Date of last certification