Cisco OL-18988-01 - Manual (Page 11)

8-11
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP and SIP)
OL-18988-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Streaming Statistics
Streaming Statistics
A Cisco Unified IP Phone can stream information to and from up to five devices simultaneously. A
phone streams information when it is on a a call or running a service that sends or receives audio or data.
The streaming statistics areas on a phone’s web page provide information about the streams. Most calls
use only one stream (Stream 1), but some calls use additional streams. For example, a barged call uses
Stream 1 and Stream 2.
To display a Streaming Statistics area, access the web page for the phone as described in the “Accessing
the Web Page for a Phone” section on page 8-1 , and then click the Stream 1, Stream 2, Stream 3,
Stream 4,or Stream 5 hyperlink.
Table 8-5 describes the items in the Streaming Statistics areas.
Table 8-5 Streaming Statistics Area Items
Item Description
Remote Address IP address and UDP port of the destination of the stream.
Local Address IP address and UPD port of the phone.
Start Time Internal time stamp indicating when Cisco Unified Communications Manager requested that the
phone start transmitting packets.
Stream Status Indication of whether streaming is active or not.
Host Name Unique, fixed name that is automatically assigned to the phone based on its MAC address.
Sender Packets Total number of RTP data packets transmitted by the phone since starting this connection. The value
is 0 if the connection is set to receive only mode.
Sender Octets Total number of payload octets transmitted in RTP data packets by the phone since starting this
connection. The value is 0 if the connection is set to receive only mode.
Sender Codec Type of audio encoding used for the transmitted stream.
Sender Reports Sent 1 Number of times the RTCP Sender Reports have been sent.
Sender Report Time
Sent
1
Internal time stamp indicating when a RTCP Sender Report was sent.
Rcvr Lost Packets Total number of RTP data packets that have been lost since starting receiving data on this
connection. Defined as the number of expected packets less the number of packets actually received,
where the number of received packets includes any that are late or duplicate. The value displays as
0 if the connection was set to send-only mode.
Avg Jitter Estimate of mean deviation of the RTP data packet inter-arrival time, measured in milliseconds. The
value displays as 0 if the connection was set to send-only mode.
Rcvr Codec Type of audio encoding used for the received stream.
Rcvr Reports Sent 1 Number of times the RTCP Receiver Reports have been sent.
Rcvr Report Time
Sent
1
Internal time stamp indicating when a RTCP Receiver Report was sent.
Rcvr Packets Total number of RTP data packets received by the phone since starting receiving data on this
connection. Includes packets received from different sources if this is a multicast call. The value
displays as 0 if the connection was set to send-only mode.
Rcvr Octets Total number of payload octets received in RTP data packets by the device since starting reception
on the connection. Includes packets received from different sources if this is a multicast call. The
value displays as 0 if the connection was set to send-only mode.