Cisco OL-18988-01 - Manual (Page 5)

8-5
Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP and SIP)
OL-18988-01
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely
Network Configuration
To display the Network Configuration area, access the web page for the phone as described in the
“Accessing the Web Page for a Phone” section on page 8-1 , and then click the Network Configuration
hyperlink.
Table 8-2 Network Configuration Area Items
Item Description
DHCP Server IP address of the Dynamic Host Configuration Protocol (DHCP) server from
which the phone obtains its IP address.
BOOTP Server Indicates whether the phone obtains its configuration from a Bootstrap
Protocol (BootP) server.
MAC Address Media Access Control (MAC) address of the phone.
Host Name Host name that the DHCP server assigned to the phone.
Domain Name Name of the Domain Name System (DNS) domain in which the phone
resides.
IP Address Internet Protocol (IP) address of the phone.
Subnet Mask Subnet mask used by the phone.
TFTP Server 1 Primary Trivial File Transfer Protocol (TFTP) server used by the phone.
Default Router 1–5 Default router used by the phone (Default Router 1) and optional backup
routers (Default Router 2–5.
DNS Server 1–5 Primary Domain Name System (DNS) server (DNS Server 1) and optional
backup DNS servers (DNS Server 2–5) used by the phone.
Operational VLAN ID Auxiliary Virtual Local Area Network (VLAN) configured on a Cisco
Catalyst switch in which the phone is a member.
Admin. VLAN ID Auxiliary VLAN in which the phone is a member.
Unified CM 1–5 Host names or IP addresses, in prioritized order, of the
Cisco Unified Communications Manager servers with which the phone can
register. An item can also show the IP address of an SRST router that is
capable of providing limited Cisco Unified Communications Manager
functionality, if such a router is available.
For an available server, an item will show the Cisco Unified Communications
Manager server IP address and one of the following states:
• Active—Cisco Unified Communications Manager server from which the
phone is currently receiving call-processing services.
• Standby—Cisco Unified Communications Manager server to which the
phone switches if the current server becomes unavailable.
• Blank—No current connection to this Cisco Unified Communications
Manager server.
An option may also include the Survivable Remote Site Telephony (SRST)
designation, which indicates an SRST router capable of providing
Cisco Unified Communications Manager functionality with a limited feature
set. This router assumes control of call processing if all other Cisco Unified
Communications Manager servers become unreachable. The SRST
Cisco Unified Communications Manager always appears last in the list of
servers, even if it is active. You configure the SRST router address in the
Device Pool section in Cisco Unified Communications Manager.