ALTANA Haze-Gard Dual User Manual
Page 33
Advertising
32
English
statistic
on/off
result
on/off
ASTM
T: 89.4
H n= 11
m= 10.6
s= 1.16
12.7
CONT. MODE
To save a measurement value and
return to standby mode, proceed as
described above under ISO
Continuous Mode.
9.3
Continuous Mode Statistics
It is also possible to carry out a
statistical evaluation of the measu-
rement values in Continuous Mode.
The measured values are written to
the same memory as in normal
operation.
Select the desired function by
pressing the
“statistic” :
or
“result” button.
The selected function is indicated
on the display.
You can now run the desired area of
your specimen through the device
and observe the measurement
values on the display. If you wish to
save a value, press the “operate”
button or foot switch.
9 Continuous Mode
Advertising