ALTANA Gardner-Scrub Short Instructions - Manual (Page 2)

Measure what you see.
Additives & Instruments
A member of
BYK-Gardner USA · 9104 Guilford Road · Columbia · MD 21046 · USA · Phone +1-301-483-6500 · Fax +1-301-483-6555 · www.byk.com/instruments
298 023 031 E 1406
ENGLISH
Gardner-scrub Abrasion Tester
A Settings
• Touch to open the Setup menu
B Cycle count
• Up arrow indicates the machine is counting up from zero
• Down arrow indicates the machine is counting down from
the programmed number of cycles
C Progress bar
D Programmed cycles
• The machine will stop running after reaching this number
of cycles
E Start/Pause button
• While machine is in motion this will display a pause button
(above). Touching this stops the machine without resetting#
the cycle count.
• While machine is stopped this displays a start button
F Cycles/ minute
G Stop button
• Stops the machine and resets the cycle count
Touch Screen
Cycles set
• When started the machine will operate for this number of cycles
then shut off
CPM
• Cycles Per Minute
Count
• Determines whether the machine will count up from zero or
down from the “cycles set” amount
Language
• Available languages are English, German, Spanish, French, Italian,
Chinese, Japanese and Portuguese
Contrast
• Allows you to make the screen lighter or darker to be easier to see
A – Back button
• Return to the home screen
Setup-Menü
Column 1
• adjustable setting
Column 2
• current setting
Column 3
• change setting