English, Hoffman scratch tester, Operating the instrument adjusting the load – ALTANA Hoffman Scratch Hardness Tester Short Instructions User Manual

Page 2

Advertising
background image

Measure what you see.

Additives & Instruments

A member of

BYK-Gardner USA · 9104 Guilford Road · Columbia · MD 21046 · USA · Phone +1-301-483-6500 · Fax +1-301-483-6555 · www.byk.com/instruments

199 022 304 E 1111

ENGLISH

•

The large rider weight produces a load of 100 grams

per increment

•

The small rider weight produces a load of 25 grams

per increment

•

Attach the rider weight(s) to the scale arm with

the arrow pointing left to the desired scale marker

Hoffman Scratch Tester

Operation

Operating the Instrument

Adjusting the Load

•

Place your hand on the roller carriage with thumb and

forefinger over the roller closest to the scratching tool

•

Apply sufficient downward pressure so that the end of

the scale arm is lifted off the surface into an approximately

horizontal position

•

While maintaining downward pressure pull the roller

carriage in the direction opposite the scale arm

Example:

Adhesion = The force required to scrape a path through the film,
when the stylus begins its motion on an uncoated portion of the panel

Scratch Hardness = The force necessary to cut through the film to the
substrate.

total load = (100 X 15) + (25 X 7) = 1675 grams

Advertising