ALTANA Byko-Cut Universal Manual - Manual (Page 9)

8
English
Start-up and power-supply
5. Start-up and power-supply
Before starting, read the manual and follow the
safety instructions and general information. Unpack
the instrument and check the delivery contents for
completeness (Please refer to chapter „delivery
contents“).
Before starting place the battery in the instrument.
The instrument is powered by a 1.5 V Mignon
(alkaline)battery (type AA)
Only use Alkaline batteries !
To assure the instrument is always ready to use, a
replacement battery should be available.
5.1 Battery installation
To insert or replace the battery, open the cover
by turning it to the left or right with a coin by 90
degrees. Turn the instrument with the opening
upside down and let the battery slide to your hand.
Insert the new battery with the plus pole first into the
battery compartment and close it by turning the lid
by 30 degrees to the right.
Caution: Batteries and rechargeable batteries are
special waste and must not be disposed of with
household waste. Make certain to observe the
disposal instructions of the battery or rechargeable
battery manufacturer.