ALTANA Pendulum Hardness Tester Short Instructions - Manual

269 020 584 E 0806
Additives & Instruments
A member of
Measure what you see.
BYK-Gardner GmbH · Lausitzer Strasse 8 · 82538 Geretsried · Germany · Tel. +49-8171-3493-0 · Fax +49-8171-3493-140 · www.byk.com/instruments
216 021 044 E 0911
ENGLISH
Pedulum Hardness Tester Mounting of the protective cover
• Remove the protective film and clean the acrylic glass parts.
• Attach the profile rail (8) with miter on top sidewise to part (1)
and (2).
• Push part (3) and (4) from top into the profile rails (8).
• Shift part (6) and (7) from top (knob outside) into the
profile rails (8).
• Attach the profile rails (9) onto part (5).
• Set part (5) on top of part (1) and (2).
• The acrylic glass parts can also be fixed to the profile rails with an
appropriate adhesive.
5
6
4
3
10
2
9
8
7
1
8