ALTANA Pendulum Hardness Tester System Installation - Manual

269 020 584 E 0806
Additives & Instruments
A member of
Measure what you see.
BYK-Gardner GmbH · Lausitzer Strasse 8 · 82538 Geretsried · Germany · Tel. +49-8171-3493-0 · Fax +49-8171-3493-140 · www.byk.com/instruments
Please note detailed operating instructions in English on CD-ROM.
ENGLISH
Pendulum Hardness Tester
System Installation
1. Bubble level
2. Screw feet
3. Wire release
4. Light barrier
5. Pendulum
6. Lifting table
7. Handle
8. Displacement arm
9. Display and keyboard
10. On/Off Switch
How to setup the instrument?
• Place the instrument on a vibration free surface
• Balance the bubble level (1) properly with the screw feet (2)
• Mount the wire release (3) to the light barrier (4) (6° König/12° Persoz)
• Place the pendulum (5) into the pins of the lifting table (6)
(arrow pointing to the front)
• Mount the protective cover and place it on the instrument
• Insert the handle (7)
5
6
4
3
10
2
9
8
7
1