English, How to transfer data to temp-chart, How to set oven start – ALTANA Temp-Chart Short Instructions User Manual
Page 5
269 020 584 E 0806
Additives & Instruments
A member of
Measure what you see.
ENGLISH
3
How to transfer data to temp-chart?
•
Switch on the temp-gard logger
•
Connect USB-Stick to temp-gard logger
•
Data will be automatically saved on the USB-Stick
1. Empty USB-Stick
g Measurement data is saved on USB-Stick and remain on logger
2. USB-Stick with Organizer Files
g
The selection menu “Configuration Files” will appear
−
No configuration g organizer & measurement data remain in
logger, data is saved on USB-Stick
−
Organizer xxx g measurement data is saved on USB-Stick
organizer & data are deleted in logger g new organizer is
transferred to logger
•
Remove stick from logger and connect to PC
•
Select menu “Instrument” in temp-chart
•
Select SRAM/USB Stick
•
Select “Transfer Data”
•
Select file to be transferred g Organizer name will be offered as
file name (changeable)
•
Close g Measuring Curve will be displayed
How to set Oven Start?
•
Data Menu
g
Set Oven Start
A vertical line appears which can be fixed on the real start point.
Confirm or Modify “General Information” and Sensors