AltiGen MAXCS 7.0 Update 1 Softswitch Deployment Guide - Manual (Page 7)

MAXCS 7.0 All-Software Solution Deployment Guide Page 7 of 14
Installation
This section provides detailed instructions for installing MAXCS ACM Softswitch release 7.0 Update 1. We
strongly recommend that you review the MAXCS Softswitch training presentation “Installation and
Configuration” in the AltiGen Communications Knowledge Base before you begin your first MAXCS Softswitch
deployment.
Step 1: Run the HMCP Certification Tool
Before you install MAXCS, you will install and run the HMCP Certification Tool.
1. Log into the server as a user with administrative privileges.
2. Insert the MAXCS ACM Softswitch CD into the drive of the server.
3. On the MAXCS ACM Softswitch CD, navigate to the Server Application folder and open the subfolder
HMCP Certification Tool.
4. In the HMCP Certification Tool folder, right-click Setup. Choose Run as Administrator. The installation
wizard starts.
5. On the Welcome panel, click Next.
6. In the next panel, enter a user name and organization, and then click Next.
7. In the next panel, accept the default folder for the installation, and then click Next.
8. In the next panel, click Install.
9. After the files have been installed, click Finish.
10. The server must be restarted; click Yes.
11. After the system restarts, in Windows, choose Start > All Programs > AltiGen HMCP Certification
Tool.
12. When the tool opens, confirm that the Test Mode is set to All In One. Leave the CPU Threshold value
at 30%. Click Start.