AltiGen MAXCS 7.0 Update 1 MaxInSight - Manual (Page 17)

MaxInSight Manual 13
Conf
iguring Dat
a
Displays
C
H A P T E R
3
Configuring Data Displays
After you have enabled the workgroups you want to monitor
(Configure > Configure Workgroup to Monitor), you can then
configure the data displays you want to see.
Configuring Workgroup Data Displays
You can display rows of workgroup data in the following ways:
•
One workgroup only
•
Multiple workgroups in rotating views, one workgroup at a
time
•
Multiple workgroups on display at the same time
In addition to row views, you can also create gauge views, time
line views, and bar views.
You can configure individual fields to alert you when specified
thresholds are reached. See “Configuring Alerts” on page 25.
Configuring for a Single Row-Type Display
To configure a row view for a single workgroup or multiple
workgroups in a rotating display, choose Add > Add Single
Workgroup View.
A configuration dialog box lists the workgroups you have enabled: