AltiGen MAXCS 7.0 MaxOutlook User Manual
Page 69
MaxOutlook Manual 63
Co
nfigur
at
ion
•
Echo Suppression—Check this check box if you are experiencing
echo.
•
ToS(Hex)—The ToS byte indicates the type of service. For IPTalk, you
need high priority service, and the default of “0” set here indicates high
priority service. However, if your company router supports DSCP EF,
then set this field to “A0”. The ToS value is gateway-based. For
guidance, see your system administrator.
•
802.1—This setting is related to the priority given to voice packets
traversing your network. For guidance on setting this value, see your
system administrator.
•
From the Voice Through drop-down list, choose the sound card that
will carry the incoming and outgoing voice. It could be a sound card in
your PC, or it could be a USB-based sound card in your headset
system.
•
From the Ring Through drop-down list, choose the device that will
carry the incoming ring. When you’re away from your desk, you may
prefer the ring to come through your PC speakers, rather than your
headset system.
•
SIP Transport—These settings secure the SIP signaling messages and
the RTP. SIP signaling is secured using transport layer security (TLS).
RTP or SIP-associated media is secured using the secure RTP (SRTP)
protocol. For guidance with these settings, see your system
administrator.