American Diagnostic Corporation (ADC) Advantage 6012N - Manual (Page 11)

9. CARE AND MAINTENANCE
Do not expose the device to either extreme temperatures, humidity, dust or
direct sunlight.
Handle the cuff carefully and avoid all types of stress through twisting or
buckling in order not to damage the sensitive air-tight bubble.
Clean the device with a soft, dry cloth. Do not use gas, thinners or similar
solvents. Spots on the cuff can be removed carefully with a damp cloth and
soapsuds. Do not submerge the cuff in water!
Handle the tubing carefully.
Keep the tube away from sharp edges.
Do not drop the monitor or treat it roughly in any way.
Never open the monitor!
This invalidates the manufacturer’s warranty.
Note: According to international standards, your monitor should be checked for calibration every 2
years. Contact ADC for an accuracy check.
10. TECHNICAL SPECIFICATIONS
Weight: .96 lbs. (436 g) (with batteries + cuff)
Size: 3.75” x 4.25” x 5.5”
85mm x 77mm x 140mm (including cuff)
Storage temperature: 23°F−122°F (–5°C− +50°C)
Humidity: 15 to 85% relative humidity maximum
Operation temperature: 50°F−104°F (10°C−40°C)
Display: LCD (Liquid Crystal Display)
Measuring method: Oscillometric
Pressure sensor: Capacitive
Measuring ranges
SYS/DIA Pressure: SYS/DIA: 30 to 280 mmHg
Pulse: 40 to 200 beats per minute
Cuff pressure display range: 0-299 mmHg
Memory: Automatically stores the last measurement.
Measuring resolution: 1 mmHg
Accuracy: Pressure within ± 3 mmHg or 2% of
the reading
≥200mmHg
Pulse ± 5 % of the reading