Casio EXILIM K1160PCM2DMX - Manual (Page 14)

14
Quick Start Basics
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
The flash will take longer than normal to charge if it is being used when the battery
level indicator is showing
or while “Alkaline” is selected for the “Battery
Type” setting (page 15).
indicates that the flash is disabled. Replace batteries as soon as possible.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about one day with no power supplied while the batteries
are dead will cause its date and time settings to be cleared. You will have to
re-configure the settings after power is restored.
• See page 174 for information about battery life and memory capacity.
• Certain camera operating conditions and battery can cause the battery level
indicator to indicate the battery level incorrectly. In this case, the camera may
suddenly shut down without retracting the lens. If this happens, replace or charge
the batteries and configure the correct “Battery Type” setting.
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (flash off) for the flash setting
(page 35).
• Enable the Auto Power Off and the Sleep features to protect against wasting
battery power when you forget to turn off the camera (pages 131, 131).
• Select “Off” for “Continuous AF” (page 81).
• Turn off the LCD monitor screen and use the viewfinder (page 136).
• Avoid unnecessary optical zoom operations.
Remaining Power High Low
Battery Indicator
* * *
Indicator Color Cyan
*
Amber
*
Red
*
Red