Casio EXILIM K1160PCM2DMX - Manual (Page 28)

28
Snapshot Tutorial
The control panel can be used to configure camera settings.
1.
In the REC mode, press
[8].
2.
Use [8] and [2] to select
the setting you want to
change.
This will select one of the
control panel icons and display
its settings.
• The content of the control panel is different when shooting a movie and when
using some BEST SHOT scenes (Move Out CS, Move In CS, Multi-motion
Image).
3.
Use [4] and [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
NOTE
• You also can configure settings other than those listed above (page 76).
Using the Control Panel
[SET]
[8] [2] [4] [6]
1
9
5
3
4
7
8
2
6
Control panel
1 Exposure mode (page 29)
2 Image size/Quality* (pages 31, 85)
3 ISO sensitivity (page 38)
4 White balance (page 38)
5 EV shift (page 40)
6 Metering mode (page 41)
7 AF area (page 41)
8 Flash (page 35)
Continuous shutter (CS) speed (High-speed CS, Flash CS modes)
(pages 50, 51)
9 Date/Time (page 43)
Prerecord (Still image) Time (High-speed CS mode) (page 51)
Flash continuous shutter (CS) images (Flash CS mode) (page 50)
* Image quality cannot be changed using the control panel.