Casio EXILIM K1160PCM2DMX - Manual (Page 50)

50
Snapshot Tutorial
This mode will record consecutive images while firing the
flash.
• You can select a CS speed of 1 image, 3 images, or 5
images per second.
• In this mode, you can specify consecutive recording of
three to 10 images. Recording will stop if you release
the shutter button.
1.
Set the mode dial to ª (Flash CS).
2.
Press
ð
(Flash up) to open the flash unit.
3.
Use [8] and [2] to select the second control panel option from the
bottom (Flash CS fps).
4.
Use [4] and [6] to select the continuous
shutter (CS) speed you want and then press
[SET].
5.
Use [8] and [2] to select the bottom item
(Flash CS Images).
6.
Use [4] and [6] to select the number of flash
continuous shutter (CS) images you want to
shoot and then press [SET].
You can select any one of the following values: 3, 5, 7, or 10.
7.
Press the shutter button to shoot.
8.
If you keep the shutter button depressed, the camera will shoot the
number of images you specified. Recording will stop if you release the
shutter button before the specified number of images is reached.
9.
Save the CS images (page 53).
Using Continuous Shutter
Using Flash Continuous Shutter
Flash
Flash Unit CS Speeds