Blinds Chalet Floral Pattern Roman Shades - Manual (Page 4)

4
INSTALLATION INSTRUCTIONS
Step 1. Check Package Contents
Missing part? Call 1-800-264-1190
Mounting hardware kit includes the following:
Part Quantity
a. Mounting Brackets 2 (shades up to 36” wide)
3 (shades 36” to 48” wide)
4 (shades 48” to 96” wide)
Note: brackets are for Outside Mount installations only!
b. 1-1/2” & 2" Screws 2 (shades up to 36” wide)
3 (shades 36” to 48” wide)
4 (shades 48” to 96” wide)
c. 3/4” Screws 2 (shades up to 36” wide)
3 (shades 36” to 48” wide)
4 (shades 48” to 96” wide)
Note: 3/4” & 1-1/2” & screws are for Outside Mount installations only ; 2” screws
are for Inside Mount installations only
Step 2. Tools Required
Pencil, tape measure, level, screw driver, step stool, drill.
Step 3. Installation
Wallboard or Plaster: use anchors specifically designed for
hollow walls (not included).
Concrete, Stone, Brick: use a masonry drill bit and anchors or
screws specifically designed for masonry (not included).
For Outside Mounting:
One bracket should be positioned about 2” to 6” from each end
of the head rail. For wider shades that require 3 or 4 brackets,
these should be spaced evenly between the two outermost
brackets. The brackets must not interfere with the cord guides or
cord lock or in any way impede the movement of the lift cords –
therefore, we recommend that you hold the shade in place and
mark the desired bracket locations with a pencil.