Blinds Chalet Floral Pattern Roman Shades - Manual (Page 6)

6
Step 5. How to Operate
STANDARD CORDED SHADES:
To raise or lower the shade, pull the lift cord slightly to release the
cord lock. Adjust the shade to the desired height, and then move the
lift cords slightly toward the outside of the shade to lock in place.
CONTINUOUS LOOP CORDED SHADES:
To raise or lower the shade, pull the lift cord slowly & fluently.
TOP-DOWN/BOTTOM-UP SHADES:
The right side cord controls bottom up/down function. The left
side cord controls top down/up function.
REPLACEMENT PARTS
In the event that replacement parts are ever needed, you may
call: 1-800-264-1190. Please be sure to provide the following
information, if possible:
•
The complete model or catalog number of your product
•
A description of the product
•
A description of the part needed
Care Instructions
The packaging and shipping of soft treatments frequently results in
minor wrinkling of the fabrics used.
There are different characteristics and handling needs for the
variety of fabrics offered in this program.
Please refer to the descriptions below for guidance on how to
remedy minor wrinkles upon delivery.
First, allow all items to hang for a few days so wrinkles relax and
begin to fall out.
Silk fabrics:
• Natural irregularities give the fabric its unique and desired
character. The appearance of slubs, nubs, loops and barre
ridges are universally accepted as normal and should not be
considered defects.
• If necessary, steam silk to remove stubborn wrinkles. Please
note that a good quality steamer is needed so water spots
won’t form from water spitting out from the steaming device.
Rayon/Poly blends:
• If necessary, steam rayon/poly to remove stubborn wrinkles.
Please note that a good quality steamer is needed so water
spots won’t form from water spitting out from the steaming
device.
100% Polyester:
• If necessary, steam polyester or gently iron on a low heat
setting to remove stubborn wrinkles. 100% Polyester fabrics
release wrinkles easily. Steam or iron on the Polyester /
Synthetic Fabrics setting (Low), but be aware that Polyester will
melt if the iron is too hot.
Cotton/Poly blends:
• If necessary, gently iron on a Blended Fabric (Medium)