BMW 2007 550I Sedan - Manual (Page 240)

Replacing components
238
1 Turn signal
2 Tail lamp and brake lamp
3 Backup lamp
4 Brake lamp
5 Reflector
6 Tail lamp
7 Side marker lamp
Sports Wagon
> Turn signals 1, tail lamps 3 and side marker
lamps 7 are designed using LED technol-
ogy. In the event of a malfunction, please go
to your BMW center or a workshop that
works according to BMW repair procedures
with correspondingly trained personnel.
> Backup lamps: 16-watt bulb, W16W
> Brake lamps: 21-watt bulb, P21W
1 Turn signal
2 Brake lamp
3 Tail lamp
4 Backup lamp
5 Brake lamp
6 Reflector
7 Side marker lamp
Center brake lamp
This lamp uses LED technology for operation.
In the event of a malfunction, please go to your
BMW center or a workshop that works accord-
ing to BMW repair procedures with correspond-
ingly trained personnel.
Fender-mounted lamps
Sedan
The illustration shows the left-hand side of the
cargo bay.
All the bulbs are integrated into a central bulb
fitting.
1. Lift up floor mat.
2. Undo the quick-release fasteners of the
side panel and pull out the panel.
3. Turn the lock to the left and remove the bulb
holder.
4. Backup lamps:
Remove and replace the bulb.
Other lamps:
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
Sports Wagon
1. Right side: Unhook the retaining strap * ,
refer to page 126 .
2. Open the side panel.
3. Turn the bulb socket to the left and remove.
4. Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
Online Edition for Part no. 01 41 0 013 308 02/07 BMW AG