Adju sting – BMW 2007 550I Sedan User Manual
Page 50
Adju
sting
48
The adjustment of the lumbar support is not
stored in the memory.
Storing
1.
Switch on radio readiness or ignition, refer
to page
.
2.
Set the desired seat, exterior mirror and
steering wheel positions.
3.
Press the
button:
The LED in the button lights up.
4.
Press the desired memory button
1 or 2:
The LED goes out.
Requesting
Do not request a position from the mem-
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering wheel.
<
Comfort mode
1.
Open the driver's door after unlocking or
switch on radio readiness.
2.
Briefly press the desired memory button
1
or
2.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off.
2.
Press the desired memory button
1 or 2
and maintain pressure until the adjustment
process has been completed.
If the
button was pressed inadvertently:
press the button again; the LED goes out.
Requesting with remote control
The last positions of the driver's seat, the exte-
rior rearview mirrors, and steering wheel are
stored for the remote control currently in use.
You can choose when the position is requested:
>
Request when unlocking vehicle
>
Request when opening driver's door
When using this feature, always make
sure that the footwell behind the driver's
seat is empty and unobstructed. Failure to do
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.
<
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
iDrive, for explanation of principle, refer to
page
.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
5.
Change to upper field if necessary. Turn the
controller until "Door locks" is selected and
press the controller.
6.
Select "Central locking" and press the con-
troller.
7.
Select "Last seat pos." and press the con-
troller.
8.
Select "After unlocking" or "After door
opened".
9.
Press the controller.
Online Edition for Part no. 01 41 0 013 308 02/07 BMW AG