Braeburn 6400 Installer Guide - Manual (Page 7)

7 Installer Guide
All System Types
Additional Wiring Options
NOTE: Additional options are configured in the Installer Settings section.
S1 Indoor or Outdoor Remote Sensor [note 1]
S2 Indoor or Outdoor Remote Sensor [note 1]
A/D* Economizer Control (6300, 6400 only) /
Dehumidifier Output (6400 only) [note 2]
H Humidifier Output (6400 only) [note 3]
* This terminal appears as A on the 6300 and A/D on the 6400.
NOTES - Additional Wiring Options
[1] These terminals can be used to connect a Braeburn ® indoor or outdoor remote sensor.
[2] This terminal can be used either for outside air control (6300 and 6400) or to connect to an external
dehumidifier (6400 only).
[3] This terminal can be used to connect an external humidifier (6400 only).
Attaching the thermostat to the sub-base
1) Line up the thermostat body with the sub-base.
2) Carefully push the thermostat body against the
sub-base until it snaps in place.
NOTE: This thermostat ships configured as a 1H/1C conventional
thermostat. Confirm installer settings. See page 10.
UP UP
S1
S2
G
Y1
Y2
A
H
L
C
W1/E
/AUX1
W2/
AUX2
W3/
O/B
RH
RC
W1/E
/AUX1
G
RESET RESET
3) Insert Quick Reference Card into slot
on top of thermostat.
4