Windshield washer fluid – Buick 2007 Rainier User Manual

Page 391

Advertising
background image

How to Check Power Steering Fluid

To check the power steering fluid, do the following:

1. Turn the key off and let the engine

compartment cool down.

2. Wipe the cap and the top of the reservoir

clean.

3. Unscrew the cap and wipe the dipstick with a

clean rag.

4. Replace the cap and completely tighten it.

5. Remove the cap again and look at the

fluid level on the dipstick.

For vehicles with the 4.2L L6 engine, the level
should be at the C (Cold) mark. For vehicles with
the 5.3L V8 engine, the level should be at the
FULL mark. If necessary, add only enough fluid to
bring the level up to the mark.

What to Use

To determine what kind of fluid to use, see
Recommended Fluids and Lubricants on page 489.
Always use the proper fluid. Failure to use the
proper fluid can cause leaks and damage hoses
and seals.

Windshield Washer Fluid

What to Use

When you need windshield washer fluid, be sure
to read the manufacturer’s instructions before
use. If you will be operating your vehicle in an area
where the temperature may fall below freezing,
use a fluid that has sufficient protection against
freezing.

391

Advertising