Buick 2007 Rainier - Manual (Page 60)

1.3. Put the child restraint on the seat.
1.4. Attach and tighten the lower
attachments on the child restraint to the
lower anchors.
2. If the child restraint manufacturer recommends
that the top tether be attached, attach and
tighten the top tether to the top tether anchor,
if your vehicle has one. Refer to the child
restraint instructions and the following steps:
2.1. Find the top tether anchor.
2.2. Route and tighten the top tether
according to your child restraint
instructions and the following
instructions. If your vehicle has a cargo
shade, route the top tether between
the seatback and the cargo shade.
Fold down the head
restraint and route the
single tether under
the head restraint and
in between the head
restraint posts.
See Rear Seat
Operation on page 16.
Fold down the head
restraint and route the
dual tether around
the head restraint.
See Rear Seat
Operation on page 16.
3. Push and pull the child restraint in different
directions to be sure it is secure.
60