Dust collector controls, Ifcc, Ordering information – CAMCORP Baghouse Collector User Manual
Page 35: Specifications
IFCC
AMETEK National Controls Corp. • 1725 Western Drive • West Chicago, Illinois 60185 • Tel: 800-323-2593 • 630-231-5900 • FAX: 630-231-1377 • www.nationalcontrols.com
DUST COLLECTOR CONTROLS
Pressure switch supplied by customer
(Unit is shipped with jumper across
“Hi” pressure switch terminal block)
.050 THK
Aluminum
Chassis
.362 Max
1.103
Max
.250 DIA. Hole 4 Plcs
3.15A Fuse
.250
Typ
A
B
B
D
E
GND
L1
L2
ORDERING INFORMATION
Caution:
1. Do not mount controls in high vibration areas without shock mounts.
2. Do not mount controls in areas of high dust or corrosive atmospheres without a protective enclosure.
3 Do not use a converter or inverter for the power source.
4. Do not mount control in high transient voltage areas without an isolation transformer.
5. Do not leave control box open.
6. Do not allow a local repair shop to repair the controls, as we employ some very sophisticated components that could be further damaged.
For service, call us directly: 800-323-2593.
Model
DNC–T2003–020
Max. No. of Outputs
3
Dimensions - Inch
Size of NEMA 4
Enclosure Reqd.
A
B
C
D
E
DNC–T2003–020
3
6.75”
4.75”
6.25”
4.25”
.250”
8” X 6” X 3.5”
DNC–T2006–020
6
6.75”
4.75”
6.25”
4.25”
.250”
8” X 6” X 3.5”
DNC–T2010–020
10
6.75”
4.75”
6.25”
4.25”
.250”
8” X 6” X 3.5”
DNC–T2020–020
20
8.75”
7.00”
8.25”
6.25”
.375”
10” X 8” X 4”
DNC–T2032–020
32
8.75”
7.00”
8.25”
6.25”
.375”
10” X 8” X 4”
DNC–T2006–R20
6
8.75”
6.875”
8.25”
6.25”
.313”
10” X 8” X 4”
DNC–T2010–R20
10
8.75”
6.875”
8.25”
6.25”
.313”
10” X 8” X 4”
DNC–T2020–R20
20
10.75”
8.875”
10.25”
8.25”
.312”
12” X 10” X 5”
DNC–T2032–R20
32
12.75”
10.875”
12.126”
10.251”
.312”
14” X 12” X 6”
SPECIFICATIONS
INPUT:
Input Voltage: 95 – 265 VAC 50/60 Hz
Power Consumption: 6.30 VA max plus load
Circuit Protection: 3.15A fast acting fuse and
72J metal-oxide varistor at input
OUTPUT:
Output: Solid state, 150VA max
Off State Leakage 1.5mA max
On State Voltage Drop: 1.5V max
ENVIRONMENTAL:
Operating Temperature: -40 to +150 F (-40 to
+66 C) Conformally coated with RTV to protect
against moisture, corrosion, and vibration
DISPLAY:
Display: 3 digit, 7 segment, green LED
Indicator LEDs: 5 green SMT (power, cleaning,
on time, off time, last output)
TIME DELAY:
On Time: 50 milliseconds – 600 seconds
Off Time: 1 – 999 seconds
Resolution: 10ms (50ms – 1 0 sec), 100ms
(10sec – 100sec), 1sec (100sec – 600sec)
Accuracy and Repeatability: ±3% over tempera-
ture and voltage range
Default Settings:
On Time: 50 milliseconds
Off Time: 15 seconds
Last Output: Max. No. of Outputs