Casablanca Fan Company Stealth dc C45GxxxB - Manual (Page 11)

9
s
teaLth
®
dc
CANOPY HARDWARE
CANOPY INSTALLATION
Canopy
Canopy
Hatch
Canopy Screws and (4) Lock
Washers
Phillips
Screwdriver
Lock
Washer
Canopy
Screw
Canopy
Step 1. Attach the canopy to the ceiling plate with
three of the 8-32 x 2
1 /
2
" long canopy screws and
lock washers provided with your Casablanca fan.
Tighten using the provided screwdriver until snug
against the ceiling.
NOTE: On sloped ceilings, align the canopy
opening with the top or peak of the room.
HANGING HARDWARE
FAN PREPARATION
PAPER MOTOR
SHIELD
FIGURE 1.
Prepare for fan installation as follows:
Remove the paper shield from the motor as shown
in Figure #1.
Step 1. Loosen the set screw making sure that
end of the Set Screw can not be seen within the
motor coupling as shown in (Figure #2). If so, you
will need to unscrew the Set Screw so that the tip
of the Set Screw does not remain in the path of the
downrod
Perma•Lock™ Downrod
and Ball Assembly
FIGURE 2.
Set Screw
Allen Wrench