Casablanca Fan Company Stealth dc C45GxxxB - Manual (Page 9)

7
s
teaLth
®
dc
Using Existing Ceiling Fixture Outlet Box
After turning the power OFF at its source (either
the circuit breaker or fuse box), lower the old
fixture and disconnect the wiring. Check the
ceiling fixture outlet box to be sure it is marked
“Approved for Ceiling Fan Mounting.” If it is not,
a new box must be installed.
GETTING STARTED
Installing a New Ceiling Fixture Outlet Box
If you do not have an existing fixture located
where you wish to place your Casablanca fan,
an approved ceiling fixture outlet box must be
installed and wired.
Note: The weight of this fan is 33 pounds.
WARNING!
To reduce the risk of fire, electrical shock,
or personal injury, mount to outlet box
marked “Acceptable Fan Support of 22.7
kg (50 lbs.) or less” using the mounting
hardware provided with the outlet box or
directly to structure.
CEILING HARDWARE (not to scale)
MOUNTING BRACKET INSTALLATION
Note: After removing the old fixture, check the
outlet box to insure that it is supported by a
joist or beam across its upper surface. If not, a 2
x4 stud must be installed.
Mounting Bracket
FAN INSTALLATION
Step 1. Thread the lead wires from the outlet box
down through the large hole in the ceiling plate.
Step 2. Align the slotted holes in the ceiling plate
with the screw holes in the outlet box.
Wire Nut (4)
Lag Screw and Washer (1)
1" x 8-32 Roundhead Screw and
Washer (2)